Most Recent Messages in Interferences

Post Message!

Advise!

Hi,everyone!! I am only 26 years old and have had a two wire pacemaker fitted two days ago.due to my bpm dropping to 10-15 per minute.my queries that I wold like a little help with are can you feel the pacemaker working/and is I true I will be a back to normal in no time?

Read More...

Playstation

Hi Moms,

Is a playstation safe to use with a pacemaker for my son who is 21mths?

Do you all have kids that plays with it and is quite comfortable?

Read More...

Just got an electric shock

I was drying my hair when the hair dryer blew up! Bang and a flash out of the actual hair dryer. I was using my right hand (pacemaker is on left side) and have a small burn in the palm of my hand. I feel a bit shaken up and my heart's racing from the shock I guess, but does this mean I must have my pacemaker checked? Can the shock affect it? Many thanks

Read More...

PM with hydromassage

Hello everyone I'm new here although I have had my pacer a little over two years now. No problems with it. I love it. I never even think about it unless I get ready to "do" something, then I do some research. I have found its difficult to get answers to my questions on Google alone. Anyway, I would like to know if anyone has used hydromassage since getting their PM. I have severe lower back pain and was looking at this option but I'm not sure if it is safe to use or not. Does anyone know or ha...

Read More...

Spinal Cord Stimulator

I currently have a Boston Scientific SCS that has given me back my life from nerve damage. Now I find out that my fainting spells are likely due to my low heart rate and a PM is likely the answer shortly.
Ist is contraindicated according to BS lit but a case by case approval may be possible.
Anybody here in this spot?

Read More...

work in the mobile phone industry. am i safe?

Hi guys,

I am getting my pacemaker in 6 days, and work in the mobile phone industry, just wondering if I will have any restrictions?
I have read online that you have to hold them a certain distance from your pacemaker, is this true?

Also read somewhere that rollercoasters are a no go....i hope this was a joke!?

Any advice would be much appreciated!

Thanks,

Amy.

Read More...

What if you get "Tazzed?"

It has occurred to me that "Less than Lethal" use of force is being increasingly employed by law enforcement. This prompts the question: Will the high voltage make the PM go outa whack?

Read More...

electric welders

Hi everybody, in regards to electric (arc welders) I have been looking into this subject and have found that it is recommended to twist the positive and negative leads together, secure the earth as close as possible to where the area is being welded, move the machine as far away from you as you can, don't lean in too close to the arc and have somebody near you that can turn the welder off if anything goes wrong...... My question is have anyone out there actually used an arc welder who has a pace...

Read More...

Neff ovens

Hi, I have a pacemaker and wondered if anyone has used a Neff Slide and Hide oven, the specs say it uses 50hz, does anyone know if this item is dangerous to use? I like the idea of the way this oven works and when removing hot items you don't have to contend with the oven door being in the way. Thanks.

Read More...

tig welding.

hi, i am a new member with a pm/dif fitted 3 years ago. in the
process of renovating a vintage car, i have come to the part
where some welding is reqired, all the information i have been
given is that wldig is a no/no.
i would like to know the strength of the signal, and a safe distance
to avoid these signals. to do this i need some type of meter,
most of the meters on amazon are for chasing gosts
could anyone tell me what type of meter i should be looking...

Read More...

tig welding

hi donb, thank you for returning my post message so quickly.
i am hoping to weld 1mm sheet mild steel useing a DC tig welder
at 30 to 40 amps. should i be twisting + and - cables together,
.and putting a sheald over the pm/icd, i would still like to know
which meter to buy, its a dc welder. anyone reading this message
with info would be welcolme. thank you.

Read More...

Tattoos?

I had my Medtronics PM replaced with a Medtronic Viva Quad XT CRT-D (defibrillator) and am worried about needing medical aid. I have a medical alert bracelet already but am worried about some idiot not noticing it. Is it unreasonable to consider a small tattoo in block letters over my implant site? I tell myself that I worry too much but then I think "what's the big deal if it makes me feel better about it?" Just not sure if it would cause any problems. I know less than zilch about what is...

Read More...

Airport security, what to do?

I have my first domestic airline flight next week since I got my PM. I'd like to know whether I should go through the normal passenger scanner or bypass the scanner and have them use a wand. I am not PM dependent, but I don't want to mess up my PM programming or cause any unnecessary fuss at the airport.

I have my PM ID card, a MedAlert pendant and will notify them at security.

Is there a clear consensus as to which is better?

Thx, Lou

Read More...

PM and an inverter

Hi
Does anyone know if an Inverter for Solar Panels would effect my Pacermaker?
Cheers Roy

Read More...

smart meters

Today the electric people knocked on my door and told me that they were putting a smart meter on my house. I told them I did not want one because of my pacemaker and the fact that it is right next to my back door and would be on the other side of my bathroom wall. The guy said too bad I am getting one and I told him I was not authorizing him to do so. He told me I would be arrested if I didnt get one.

I called the public utilities commission, and they told me that a law was passed...

Read More...

Shock?

Hi everyone, I am curious if anyone else has had a issue with there pacemaker like I did recently. While using my vacuum cleaner I was holding cord in left hand and handle with right hand, I experienced a shock of some sort. lt felt like pins and needles sticking in me, like a prickly feeling it was on my left side directly under my pacemaker site. That afternoon I noticed some discomfort in my chest and had some issues with atrial tach, and afib/aflutter that afternoon after the shock. I con...

Read More...

coat

i want a welding coat and a price. 2x size. i really need to know if they work also. gonna have a pacemake real soon and i love to weld as a hobby.. thankx.
tom...

Read More...

Treadmill Heart Rate Monitor and Pacemaker

I was on a treadmill in a gym yesterday and gripped the handles on the treadmill to obtain a pulse rate. Held the grips for an extended period of time (longer than usual to watch the change in pulse rate as I walked) and all of a sudden felt something happening with my heart rate. I checked my pulse with my finger and it had become irregular ... as though the pacemaker was no longer regulating it. Continued to be irregular throughout the day as I experienced some of the symptoms of an irregul...

Read More...

Bar code scanner

Hi, I have been back at work for a couple of months now with no major problems. This week we have been stocktaking with a hand held barcode scanner which is linked wirelessly to the till/computer system. Is it possible that this would affect my Medtronic pm? or am I just being over sensitive? thanks guys.

Read More...

Back pain

Hi
Can I use a TENS Machine ( Electrical Stimulator ) on my back with a Pacemaker?
Roy

Read More...

You know you're wired when...

Your license plate reads “Pacer4Life”.

Member Quotes

Without this little machine, we would not be here.