Merlin home monitor

Anybody know how to reset the Merlin transmitter? My wireless is showing green since last night, I think it's stuck. I'm just not sure how to reset!

5 Comments

Merlin Green Light

by Artist - 2016-08-27 21:39:33

My Merlin is connected to a land line but I suspect the green light has the same meaning for both your and my montor.  As far as I know, the green light is supposed to be showing when your Merlin is set up properly and is monitoring.  You should have a disk along with the written instructions that give step by step information for setting the monitor up.  I guess you could follow those insructions to reset your monitor, but it doesn't sound necessary since the green light is showing.  You could also check out their web site or phone them if you are unsure.

green light

by Tracey_E - 2016-08-28 09:09:30

That's what mine has, too, one green light. When in doubt, unplug it for 30 seconds, then plug it in again so it can reset. But if it's just one green light, that's what it's supposed to do. 

Green light

by pace123 - 2016-08-29 11:40:19

im really confused now, I have talked with st Jude and I thought the green light is on only when transmitting other than that, it is supposed to stay red. I'll cal them today, thank you for your replies!

Green LED

by ThadJ - 2016-09-22 15:48:09

Hi PACE123, were you able to get your issue resolved?

A little clarity about the green LED: The Merlin@home transmitter has a green power LED on it, but there is also an LED on the white cellular adapter (if you're using one). That LED will be red when getting power, solid green when looking for a cellular network, and slowly blinking green when transmitting data.

Rebooting

by nickp - 2017-03-15 10:43:29

If you need to reboot it, there's a black button on the back that will reboot it.

You know you're wired when...

The mortgage on your device is more than your house.

Member Quotes

A properly implanted and adjusted pacemaker will not even be noticeable after you get over the surgery.